When no signals are received from the water level sensor, error F10 is displayed on the electronic display of the Indesit machine. The Indesit model of electromechanical СМА, signals a problem by the flashing of the “Extra rinse” indicators - “Revolutions”, “Lock”. The “Delay for washing” - “Quick wash” indicators may also light.
Also, when the tank is filled with water, the sensor may give an empty tank signal.
How to fix the problem yourself, we will consider further.
Symptoms
What does the F10 error mean on the indesit washer, you found out. What are the signs of a pressure switch problem:
- The machine Indesit fills too little, or, conversely, a lot of water.
- Laundry is poorly wrung out.
- The tank is empty, however, the system connected a heating element for heating, which means a malfunction of the water level sensor.
On the typewriter F 10 was highlighted: independent check
How to fix it and solve the problem?
- Reboot Unplug the Indesit washing machine plug from the outlet to clear the error.
- Check the cleaning filter for clogging.
- Check connection and water supply.
What should I do if the machine still shows error F10 on the display? You will need to check the water level sensor.
- Disconnect the Indesit washing machine, unplug it.
- Remove the top cover.
- Remove a collar, and disconnect a hose from a pressostat.
- Connect a larger hose and blow. With a good pressure switch, you will hear clicks.
- Inspect all connections, wires, hoses for damage. View contacts at the time of contamination.
What to do if the previous methods did not help
Also, the reason that the Indesit washing machine generates an F10 error may lie in the control module. Why does the board fail:
- Fuse Failure.
- The thyristor control unit has closed.
- The capacitor burned out.
- Board resistor malfunction.
- Burnout triggers.
All this can lead to the above problems. How to remove the error and trouble code:
- Before repairing or replacing the board, ring the parts with a tester.
- If you need to replace the module, remove the front cover of the machine.
- Loosen the screws, disconnect the fasteners.
- Remove the broken module and exchange for a working part.
It is not difficult to solve the problem; it is important to correctly recognize the cause of the breakdown. Error F10 on the washing machine Indesit can only suggest a possible malfunction. Next up is the diagnosis.