Errors of the Liebher refrigerator can be deciphered in the instructions or in our article. This knowledge will help you detect a breakdown.
Liebher refrigeration equipment is known for its modern design and interesting technologies. High cost does not stop connoisseurs of quality before buying. The electronic system is equipped with self-diagnosis. If one of the nodes fails, the system displays a fault code.
Error codes for Liebherr refrigerators
Technique can break down for various reasons. If you adhere to the operating instructions and installation rules, then it will last for many years. And if an error is displayed, do not worry - we will indicate their values in the table below.
Before proceeding with the search for a breakdown, you need to make sure that this is not a failure in the system. To do this, unplug the refrigerator for 10-15 minutes. Then look at the display. If the values reappear, proceed to troubleshoot.
Error code | What does it mean | How to fix the breakdown yourself |
F0 | In the Biofresh zone, the sensor does not work. | Wiring and contacts are inspected. The sensor itself is checked for operability. In case of malfunction, a replacement is carried out. |
F1 | The sensor, which is responsible for measuring the temperature in the refrigerator compartment, does not work. | In this case, the temperature in the chamber may increase or decrease unregulated. Inspect the parts and replace. |
F2 / f4 | The freezer compartment evaporator is not functioning properly. | The control board receives incorrect signals. Therefore, the freezer may freeze or, conversely, not freeze. Need diagnostics and installation of a working part. |
F3 | The air sensor in the freezer compartment has failed. | The connection density is checked, the contacts are tightened. Burnt items are replaced. |
F5 | The electronic module does not work correctly or does not work at all. | The module is dialed with a multimeter. Repair is in progress - it is better to invite a specialist. |
F6 | The compressor connection circuit is broken. | Inspection of the chain, identification of a broken link, repair. |
F7 | The refrigerator is in test mode. | Nothing terrible happened. Test mode is launched to test the performance of the equipment. |
If you notice a malfunction code on the display or an unusual operation of the refrigerator, contact a service center. What should alert:
- High temperature in the chamber.
- Ice and snow on the walls.
- Non-stop operation of the compressor.
It is better to turn off and defrost the equipment, and then deal with the diagnosis of the problem.